FKM/PTFE/炭黑复合材料的性能研究
FKM／PTFE／炭黑复合材料的性能研究Properties of FKM/PTFE/carbon black composites
作 者：李恩军 张勇 任文坛 王仕峰
LI En-jun ,ZHANG Yong ,REN Wen-tan ,WANG Shi-feng（Shanghai Jiaotong University,Shanghai 200240,China）
机构地区：上海交通大学化学化工学院,上海200240
出 处：《橡胶工业》 CAS 2009年第56卷第1期 20-24页,共5页
China Rubber Industry
摘 要：在氟橡胶（FKM）／炭黑共混体系中加入聚四氟乙烯（PTFE）微粉，制备FKM／PTFE／炭黑复合材料，并对其性能进行研究。结果表明，采用PTFE微粉部分替代炭黑，硫化胶的拉伸强度、拉断伸长率及撕裂强度均明显增大，耐磨性能提高，压缩永久变形有所减小，脆性温度大大降低，但低温回弹性变差。FKM／PTFE／炭黑复合材料的热稳定性降低，在452℃出现FKM热质量损失峰后，在551℃又出现了PTFE热质量损失峰。
The FKM/PTFE/carbon black composites were prepared by adding PTFE powder into FKM/carbon black composites, and their properties were investigated. The results showed that, by partly replacing carbon black with PTFE, the tensile strength, elongation at break and tear strength of FKM/PTFE/carbon black composites improved obviously,the abrasion resistance increased, the compression set decreased and the brittle point reduced, but the low temperature resilience became poor. The thermal stability of FKM/PTFE/carbon black composites decreased, the thermal weight loss peak of FKM occured at 452 ℃,and that of PTFE was at 551℃.
关 键 词：氟橡胶 聚四氟乙烯 炭黑 复合材料
FKM PTFE carbon black composites
分 类 号：TQ325.4 [工业技术 > 化学工业 > 合成树脂与塑料工业 > 聚合类树脂及塑料] TB33 [工业技术 > 一般工业技术 > 工程材料学]
参考文献作者在撰写文献时引用的其他文献，反映本文的背景或依据。 (9篇)M Abdul Kader, Min-Young Lyu,Changwoon Nah. A study on melt processing and thermal properties of fluoroelastomer nanocomposites. Composites Science and Technology, 2006,66(10):1 431-1 443.
M Abdul Kader, Changwoon Nah. Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites. Polymer,2004,45(7) :2 237-2 247.
Maria Cristina Righetti, Giuseppe Ajroldi, Manuele Vitali, et al. Influence of solvent and filler on some physical properties of a fluoroelastomer. Journal of Applied Polymer Science, 1999,73(3) : 377-384.
平琳 王志成.填充纳米金刚石微粉氟橡胶高温性能研究.化工新型材料,2006,34(5):55-56.
徐竹 马俊辉 陈军 等.不同填料对246型氟橡胶性能的影响.,2005,26(6):21-23.
雷海军 郑元锁 乐贵强 等.短纤维增强氟橡胶的高温强伸性能研究.橡胶工业,2003,50(10):589-591.
陈旭东 刘林 许家瑞 章明秋 龚高平 马青华 董作敬.舰船用高性能密封橡胶研究（Ⅱ）纳米补强填料对氟橡胶硫化胶物理性能的影响.弹性体,2004,14(4):.
Gangal S V. Polytetrafluoroethylene, Homopolymers of Tetrafluoroethylene,Encyclopedia of Polymer Science and Engi neering(2nd) . New York:John Wiley & Sons, 1989 : 577-600.
Baker B B, Kasprzak D J. Thermal degradation of commercial fluoropolymer in air. Polymer Degradation and Stability, 1994(2) ,42 : 181-188. 谢谢你的资料！
页:
[1]