沥青树脂复合材料的摩擦磨损性能研究
沥青树脂复合材料的摩擦磨损性能研究侯宝花 查庆芳 李光科 郭燕生 李士斌中国石油大学,重质油国家重点实验室,山东东营257061 中国石油大学,石大胜华化工股份有限公司,山东东营257061
摘 要:利用树脂基复合材料制造的各种减摩耐磨零件，在机械工程中作为金属材料的替代产品或换代产品，获得了越来越多的应用。文中对通过在沥青树脂中添加聚四氟乙烯（PTFE）、二硫化钨（WS2）、石墨（GP）等固体润滑剂的复合物摩擦磨损性能进行了讨论。分别添加了一定比例的PTFE、WS2、GP的沥青树脂复合材料的磨损率是0．02～0．25×10^-7cm^3N^-1m^-1。其中加入40wt％GP的沥青树脂复合物的磨损率最低，为0．02×10^-7cm^3N^-1m^-1。这些复合材料的摩擦系数肛比纯沥青树脂下降了0．014-0．180。[著者文摘]
关键词:沥青树脂 二硫化钨 石墨 聚四氟乙烯 摩擦磨损
分类号: TB332[著者标引]文献标识码：A文章编号：1001-8948（2009）01-0022-06栏目信息：实验研究
相关文献:主题相关 全文快照
STUDY OF FRICTION--WEAR PROPERTIES OF PITCH RESIN COMPOSITESHou Bao-hua ,Zha Qing-fang ,Li Guang-ke,Guo Yan-sheng ,Li Shi-bin 1. State Key Laboratory of Heavy Oil Processing,China University of Petroleum,Dongying257061,China; 2. China University of Petroleum,Shida Shenghua Chemical Co. ,Ltd,Shandong Dongying257061,ChinaAbstract:Various antifriction parts made from resin based composites has achieved popular applications in mechanical engineering as substitute or upgrading products for metal materials. The frictional-wear performances of pitch resin blended with WS2,graphite,and PTFE etc were investigated,respectively,in this paper. The range of wear rates of pitch resin composites blended with PTFE,WS2,and GP is 0.02-0.25×10^-7cm^3N^-1m^-1. And the wear rate of 40wt% GP pitch resin composite is the lowest which is 0.02× 10^-7 cm^3N^-1m^-1. The frictional coefficients μ of pitch resin composites are reduced of 0. 014-0. 180 comparingwith pure pitch resins.[著者文摘]
Key words:pitch resin ; WS2 ; GP ; PTFE ; frictional- wear performance
页:
[1]