正交试验优化Ni-W-PTFE复合电镀工艺
正交试验优化Ni-W-PTFE复合电镀工艺何方波 陈斌 梁琨 刘蕊西安建筑科技大学理学院,陕西西安710055
摘 要:通过正交试验，得出碳钢上电沉积Ni-W-PTFE复合镀层的镀液最佳配比为：50g，LNiSO4·6H2O，50g，LNa2WO4·2H2O，35扎NiCl2-6H20，40mL／LPTFE乳液。对在此条件下电沉积的复合镀层进行能谱分析，得到镀层的成分为：镍83.01‰钨11．21％，碳5.19％，氟0．58％。镀层金相组织均匀，摩擦因数为0．16，在盐酸-硫酸混合溶液中的腐蚀速率为4．9g／（m^2·h）。[著者文摘]
关键词:碳钢 镍-钨合金 聚四氟乙烯 复合电沉积 正交试验 耐蚀性 摩擦学
分类号: TQ153.2[著者标引]文献标识码：A文章编号：1004-227X（2008）09-0004-03栏目信息：电镀
相关文献:主题相关 全文快照
Optimization on the process of Ni-W-PTFE composite plating through orthogonal testHE Fang-bo, CHEN Bin, LIANG Kun, LIU RuiXi＇an University of Architecture ＆ Technology, Xi＇an 710055, ChinaAbstract:The optimal formulation for electrodeposition of Ni-W-PTFE composite coating on carbon steel was obtained by orthogonal test： 50 g/L NiSO4·6H2O, 50 g/L Na2WO4·2H2O, 35 g/L NiC12.6H2O, and 40 mL/L PTFE emulsion. The composite coating electrodeposited under the optimal conditions was analyzed by energy-dispersive spectroscopy. The composite coating is composed of 83.01% Ni, 11.21% W, 5.19% C, and 0.58% F. The coating has homogeneous metallographic structure with a friction factor of 0.16 as well as a corrosion rate of 4.9 g/（m^2·h） in a mixed hydrochloric and sulfuric acid solution.[著者文摘]
Key words:carbon steel; nickel-tungsten alloy; polytetrafluoroethylene; composite electrodeposition; orthogonal test; corrosion resistance; tribology
页:
[1]