等离子体磺酸化丝素蛋白膜聚四氟乙烯复合小口径人工血...

聚四氟乙烯

等离子体磺酸化丝素蛋白膜聚四氟乙烯复合小口径人工血管的制备
李少彬[1] 闫玉生[1] 李辉[1] 周勰[2] 赵连娜[3] 雷波[3][1]南方医科大学珠江医院胸心外科,广东省广州市510641 [2]中山大学药学院,广东省广州市510006 [3]华南理工大学,广东省广州市510641

摘　要:背景：丝素蛋白膜用二氧化硫处理后,可表现出抗凝血活性,但丝素成膜后柔韧性及抗牵拉伸展等性能较差,如果将丝素蛋白涂覆于膨体聚四氟乙烯人造血管表面,并对涂覆后的丝素膜进行磺酸化处理,不但解决了上述不良因素,还能显著改善膨体聚四氟乙烯人造血管的血液相容性。目的：研究等离子体磺酸化丝素蛋白膜聚四氟乙烯复合小口径人工血管（复合血管）的制备过程,并探讨其制备过程的可行性。方法：采用低温等离子体技术处理普通聚四氟乙烯人工血管内表面,将制备并浓缩到一定浓度的丝素蛋白溶液均匀涂覆到人工血管内表面,再次使用低温等离子体技术对人工血管内表面的丝素膜进行磺酸化处理。以普通聚四氟乙烯人工血管为对照,进行接触角及磺酸化效果检测。结果与结论：氩气低温等离子体处理前后接触角分别为87.7°和65.1°,涂覆丝素蛋白后接触角为106.2°,二氧化硫低温等离子体处理后接触角为92.9°;X射线光电子能谱仪检测对照丝素膜表面仅有微量的硫元素（0.12%）存在,经过二氧化硫等离子体处理后丝素表面的硫元素含量上升到2.89%;X射线光电子能谱图中的S2p峰拟合曲线显示了复合血管表面的S原子主要是磺酸基团（-SO3H）。说明实验已制备出理论上具有抗凝血性能的血管。[著者文摘]

关键词:聚四氟乙烯 丝素蛋白 血液相容性 低温等离子体 二氧化硫 人工血管
分类号:　R318[著者标引]文献标识码：B文章编号：1673-8225（2010）08-01357-04栏目信息：研究与报告
相关文献:主题相关

Preparation of small-caliber expanded poly （tetrafluoroethylene） vascular grafts applied by silk fibroin film with surface sulfonation by low temperature plasma treatmentLi Shao-bin,Yan Yu-sheng,Li Hui,Zhou Xie,Zhao Lian-na,Lei Bo 1Department of Cardiothoracic Surgery,Zhujiang Hospital,Southern Medical University,Guangzhou 510282,Guangdong Province,China;2School of Pharmaceutical Science,Sun Yat-sen University,Guangzhou 510006,Guangdong Province,China;3South China University of Technology,Guangzhou 510641,Guangdong Province,ChinaLi Shao-bin,Yan Yu-sheng,Li Hui,Zhou Xie,Zhao Lian-na,Lei Bo 1Department of Cardiothoracic Surgery,Zhujiang Hospital,Southern Medical University,Guangzhou 510282,Guangdong Province,China;2School of Pharmaceutical Science,Sun Yat-sen University,Guangzhou 510006,Guangdong Province,China;3South China University of Technology,Guangzhou 510641,Guangdong Province,ChinaAbstract:BACKGROUND：Silk fibroin film showed an anti-coagulated blood activity following sulfurous acid treatment;however,its flexibility and anti-tension were poor.If the silk fibroin film was coated on small-caliber expanded poly（tetrafluoroethylene）（ePTFE）vascular grafts prior to surface sulfonation,the adverse effects were improved and the blood compatibility of ePTFE vascular grafts were remarkably enhanced.OBJECTIVE：To research the preparation of ePTFE vascular grafts applied by surface sulfonation of silk fibroin film by low temperature plasma treatment.METHODS：The ePTFE vascular grafts were treated with low temperature plasma and coated on the surface of silk fibroin.The compound was then sulfonated with low temperature plasma.The ePTFE vascular grafts were considered as the controls to detect contact angle and sulfonation.RESULTS AND CONCLUSION：The contact angle was decreased gradually form 87.7° to 65.1° following low temperature plasma treatment.Moreover,the contact angle was 106.2° following coating silk fibroin film and 92.9° following sulfonation.X-ray light-electron spectrometer demonstrated that percents of sulfur element on the surfaces of the combined blood vessel was 2.89%,respectively,while that of the control film was only 0.12%.The X-ray light-electron spectrometer also showed that most of the sulfur element were sulfonic group（-SO3H）.The results suggested the feasibility of the preparation of the combined blood vessel.[著者文摘]

Key words: