磁性聚四氟乙烯密封材料的制备及性能
磁性聚四氟乙烯密封材料的制备及性能Preparation and performance of magnetic polytetrafluoroethylene sealing material
作 者：何世权 饶文武 苏清苗
HE Shi-quan,RAO Wen-wu,SU Qing-miao（1.College of Petrochemical Technology,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Wenzhou Research Institute of Pump and Valve Engineering,Lanzhou Univ.of Tech.,Wenzhou 325105,China）
机构地区：兰州理工大学石油化工学院,甘肃兰州730050 兰州理工大学温州泵阀工程研究院,浙江温州325105
出 处：《兰州理工大学学报》 CA 2012年第38卷第1期 20-22页,共3页
Journal of Lanzhou University of Technology
基 金：温州市科技计划项目（H20090039）
摘 要：以纳米Fe3O4为主要增强填料,采用冷压成型和烧结固化工艺制备磁性聚四氟乙烯（PTFE）密封材料.分析不同纳米Fe3O4填充量对材料抗拉强度、断裂伸长率、硬度、线膨胀系数等性能的影响.结果表明：纳米Fe3O4填充量对材料性能具有显著影响,随填充量的增加,硬度增大,抗拉强度先增大后减小,断裂伸长率和线膨胀系数迅速下降.当纳米Fe3O4质量分数为5%时,填料在PTFE基体中分散性较好,硬度和拉伸强度均有所提高,断裂伸长率下降38%,线膨胀系数下降18%,PTFE密封材料性能得到提高.
Taking nano-Fe3O4 as main reinforcing filler,a magnetic polytetrafluoroethylene（PTFE） sealing material was prepared with cold-pressing and sintering process.The effect of the additive amount of nano-Fe3O4 on the tensile strength,breaking elongation,hardness,and coefficient of linear expansion of the sealing material was analyzed.The result indicated that the amount of nano-Fe3O4 could significantly influence the performance of the sealing material.Along with the increase of nano-Fe3O4,the hardness was increased,the tensile strength increased first and then decreased,and the breaking elongation and linear expansion coefficient decreased rapidly.When the mass fraction of nano-Fe3O4 was 5%,the dispersion of nano-Fe3O4 in PTFE matrix was so homogeneous,that the tensile strength and hardness could be increased,the breaking elongation decreased by 38%,and the coefficient of linear expansion decreased by 18%.Therefore,the sealing performance improved.
关键词：纳米四氧化三铁 磁性聚四氟乙烯 密封材料 制备 性能
nano-Fe3O4 ; magnetic polytetrafluoroethylene ; sealing materials ; preparation ; performance ;
分类号：TB332 [工业技术 > 一般工业技术 > 工程材料学 > 复合材料]
全文快照：饶文武，苏清苗(1．兰州理工大学石油化工学院，甘肃兰州730050；2．兰州理工大学温州泵阀工程研究院，浙江温州325105) 摘要：以纳米Fes0 为主要增强填料，采用冷压成型和烧结固化工艺制备磁性聚四氟乙烯(PTFE)密封材料．分析不同纳米Fes0 填充量对材料抗拉强度、断裂伸长率、硬度、线膨胀系数等性能的影响．结果表明：纳米Fe。O 填充量对材料性能具有显著影响，随填充量的增加，硬度增大，抗拉强度先增大后减小，断裂伸长率和线膨胀系数迅速下降．当纳米Fe。O 质量分数为5 时，填料在PTFE基体中分散性较好，硬度和拉伸强度均有所提高，断裂伸长率下降38 ，线膨胀系数下降18 ，PTFE密封材料性能得到提高．关键词：纳米四氧化三铁；磁性聚四氟乙烯；密封材料；制备；性能中图分类号：TB332 文献标识码：A Preparation and performance of magnetic polytetrafluoroethylene sealing material HE Shi—quan ¨，RAO Wen-wu 。SU Qing—miao (1．College of Petrochemical Technology，l~nzhou Univ．of TecK ，Lanzhou 730050，China；2．
页:
[1]