PTFE对复合镀层摩擦特性的影响
PTFE对复合镀层摩擦特性的影响Influence of PTFE on the Tribological Behavior of Composite Coatings
作 者：周细应 李卫红 徐洲
Zhou Xiying1; 2 Li Weihong2 Xu Zhou2（1.School of Materials Engineering; Shanghai University of Engineering Science; Shanghai 200336; China; 2.School of Materials Science and Engineering; Shanghai Jiaotong University; Shanghai 200030; China）;
机构地区：上海工程技术大学材料工程学院 上海交通大学材料工程学院
出 处：《润滑与密封》 CAS CSCD 2008年第8期 -页,共5页
Lubrication Engineering
基 金：上海市科委纳米专项基金项目(0552nm035);; 上海市教委重点学科建设基金项目(J51402)
摘 要：研究了PTFE添加量对Ni基电刷镀PTFE复合镀层的摩擦特性和磨损机制的影响。采用扫描电镜、X射线衍射仪和能谱仪分析了摩擦前后的磨损表面的形貌、组织和成分变化。结果表明:PTFE添加量对复合镀层的组织和摩擦特性有较大的影响。当PTFE体积分数为3%和4%时,复合镀层的摩擦因数最小;当PTFE体积分数为2%时,复合镀层的耐磨性最好。在磨损面上富含PTFE复合层的形成和面积随PTFE添加量的变化影响了复合镀层的摩擦特性及其磨损机制。
The tribological behaviors and wear mechanism of brush electroplated Ni-PTFE composite coatings with different PTFE addition were surveyed.The worn surface,coating microstructure and the compositional changes before and after wear test were characterized using scanning electron microscopy(SEM),X-ray diffraction(XRD)and energy-dispersive analysis of X-ray(EDAX).It is found that PTFE addition has significant influence on the microstructure and tribological property of the composite coatings.The composite coat...
关 键 词：电刷镀 Ni-PTFE 复合镀层 组织 摩擦与磨损
brush electroplating Ni-PTFE composite coatings microstructure friction and wear
分 类 号：TB302.3 [工业技术 > 一般工业技术 > 工程材料学 > 工程材料一般性问题 > 工程材料试验]
参考文献作者在撰写文献时引用的其他文献，反映本文的背景或依据。 (11篇)Yating Wu,Bin Shen,Lei Liu,et al.The tribological behaviour of electroless Ni-P-Cr-SiC composite.Wear,2006,261 (2):201-207.
K Krishnaveni,T S Sankara Narayanan,S K Seshadri.Electrodeposited Ni-B coatings:Formation and evaluation of hardness and wear resistance.Mater Chem Phys,2006,99(2):300-308.
P Gyftou,M Stroumbouli,E A Pavlatou,et al.Tribological study of Ni matrix composite coatings containing nano and micro SiC particles.Electrochim Acta,2005,50(23):4544-4550.
Li Chen,Liping Wang,Zhixiang Zeng,et al.Effect of surfactant on the electrodeposition and wear resistance of Ni-Al2O3 composite coatings.Mater Sci Eng A,2006,434(1):319-325.
G Straffelini,D Colombo,A Molinari.Surface durability of electroless Ni-P composite deposits.Wear,1999,236(1):179-188.
P Bercot,E Pena-Munoz,J Pagetti.Electrolytic composite Ni-PTFE coatings:an adaptation of Guglielmi's model for the phenomena of incorporation.Surf Coat Technol,2002,157(2):282-289.
M Pushpavanam,N Arivalagan,N Srinivasan,et al.Electrodeposited Ni-PTFE dry lubricant coating.Plat Surf Finish,1996,83(3):72-76.
Yating Wu,Hezhou Liu,Bin Shen,et al.The friction and wear of electroless Ni-P matrix with PTFE and/or SiC particles composite.Tribol Inter,2006,39(6):553-559.
Weihong Li,Xiying Zhou,Zhou Xu,et al.Microstructure of Ni-polytetrafluoroethylene composite coating prepared by brush electroplating.Surf Coat Technol,2006,201(3):1276-1281.
Lingzhong Dua,Binshi Xu,Shiyun Dong,et al.Study of tribological characteristics and wear mechanism of nano-particle strengthened nickel-based composite coatings under abrasive contaminant lubrication.Wear,2004,257(6):1058-1063.
Zhixiang Zeng,Liping Wang,Li Chen,et al.The correlation between the hardness and tribological behaviour of electroplated chromium coatings sliding against ceramic and steel counterparts.Surface & Coatings Technology,2006,201(6):2282-2288.
页:
[1]